OM/SM-DEE (CE)
16
Section 7 - User Instructions
Regulations and Safety Precautions
These Appliances have been CE marked on the basis of compliance with the EMC and Low Voltage Directive.
These appliances MUST BE installed by a competent person in conformity with the INSTALLATION AND SERVICING
INSTRUCTIONS and National Regulations in force at the time.
Particular attention MUST be paid to the following:
I.E.E. Regulations for Electrical Installations
Electricity at Work Regulations
Health and Safety at Work Act
Fire Precautions Act
Local and National Building Regulations
Those parts which have been protected by the manufacturer MUST NOT be adjusted by the User.
Users should be conversant with the appropriate provisions of the Fire Precautions Act. In particular the need for regular
servicing by a competent person to ensure the continued safe and efficient performance of the Appliance.
WARNING
TO PREVENT SHOCKS, ALL APPLIANCES WHETHER GAS OR ELECTRIC, MUST BE EARTHED.
Upon completion of the installation, the Owners Manual should be handed to the users and the installer should instruct
the responsible person(s) on the correct operation and maintenance of the Appliance. This equipment is ONLY FOR
PROFESSIONAL USE, and shall be operated by QUALIFIED persons. It is the responsibility of the Supervisor or
equivalent to ensure that users wear SUITABLE PROTECTIVE CLOTHING and to draw attention to the fact that, some
parts will, by necessity, become VERY HOT and will cause burns if touched accidentally.
IMPORTANT - READ FIRST - IMPORTANT
The Groen Steam Jacketed Kettle you have just purchased has been
handcrafted from the finest materials, meticulously inspected, and carefully tested to ensure that you receive the best
possible product. With reasonable care and periodic maintenance, it will provide years of faithful service. It is
recommended that you establish a timetable for periodic maintenance as outlined in this manual. Space is provided in
the Service Log at the back of this manual.
7.1 Equipment Description
7.1.1 General
Groen models DEE are stainless steel, steam jacketed,
floor mounted, tilting kettles with a self-contained,
electric-heated steam source. The kettle body is welded
into one piece and furnished with a reinforced bar rim
and welded "butterfly" pouring lip. The interior of the
kettle is polished to a 180 emery grit finish, and the
exterior is given a bright semi-deluxe finish. The unit is
ASME shop inspected and registered with the National
Board for working pressures up to 50 PSI. Kettle
support, tilting mechanism, and controls are contained
in an enclosed base resting on tubular legs with
adjustable ball feet. Tilting is provided by a self-locking,
worm-and-gear device.