Lay parts A, B & C on a flat surface as shown
above.
Attach A to B & C, using the provided 2 1/2”screws,
through the predrilled holes on A, as shown above.
Attach a second part A to the other side of B & C as
described in Step 2. This completes one side of
your Square Foot Garden Table. Complete the sec-
ond side, using Steps 1-3.
Stand up the two completed sides and place part D
in between them, on the ledge of part B & holding
it tight to both assembled sides as shown above..
1.
2.
3.
4.
A
B
C
Attach part D to part A using the provided 1 5/8”
screws, through the predrilled holes, as shown
above. Repeat steps 4 & 5 for the other end.
Your Elevated Garden Bed should now look like
this.
5.
4.
D
