manualshive.com logo in svg

Grizzly T32719, Owner'S Manual

Share
Download
Grizzly T32719 Owner'S Manual Download Page 26

-24-

Model T32719 (Mfd. Since 06/21)

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown 
are available for purchase. Call 

(800) 523-4777 or visit www.grizzly.com/parts to check for availability.

Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes 

off or becomes unreadable, the owner of this machine MUST replace it in the original location 

before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.

Labels & Cosmetics

MODEL T32719

36" BENCHTOP PAN & BOX BRAKE

Specifications

WARNING!

Max. Workpiece Thickness: 16 Ga. 

(Mild Steel)

Max. Workpiece Width: 36"
Min. Reverse Bend: 

??

"

Max. Pan Depth: 

??

"

Bending Range: 0˚–135˚
Weight: 180 lbs. 

Date

 S/N

Mfd. for Grizzly in China

To reduce risk of serious personal injury when using:

  1. Read and understand manual before using.
  2. Always wear approved eye protection and leather gloves.
  3. Secure brake to floor before using.
  4. Chamfer and deburr sharp metal edges before bending.
  5. Do not exceed rated capacity.
  6. Do not use breaker bar to gain leverage.
  7. Do not bend wire or nails.
  8. Always keep hands and fingers away from clamping block and 

bending fingers when raising/lowering bending leaf.

  9. Do not operate under influence of drugs or alcohol, or when tired.
 10.  Prevent  unauthorized  use  by  children  or  untrained  users.

PINCH

HAZARD!

Keep hands/fingers 
clear of clamping and 
bending blocks during 
operation.

To reduce risk of death 

or serious injury, read 

manual BEFORE using 

machine.
To get a new manual, 

call (800) 523-4777 or 

go to www.grizzly.com.

WARNING!

EYE INJURY

HAZARD!

Always wear safety 
glasses when using 
this machine.

T32719

LACERATION

HAZARD!

Chamfer and deburr 
sharp metal edges 
before bending.

CAUTION

101

102

103

104

105

106

107

REF PART #

DESCRIPTION

REF PART #

DESCRIPTION

101 PT32719101 READ MANUAL LABEL

105 PT32719105 LACERATION HAZARD LABEL

102 PT32719102 WEAR GLASSES LABEL

106 PT32719106 MODEL NUMBER LABEL

103 PT32719103 MACHINE ID LABEL

107 PT32719107 TOUCH-UP PAINT, GRIZZLY GREEN

104 PT32719104 PINCH HAZARD LABEL

Summary of Contents for T32719





























Reviews:

No comments

Brands by name

Popular brands

Load more brands