T28172/369/370 Roller Tables (Mfd. 10/17)
-5-
Use the optional T28378 Mounting Plate to con-
nect roller tables to a machine.
Items Needed
Qty
Additional Person .............................................. 1
Wrench Open-End 14mm .................................. 1
Socket 14mm ..................................................... 1
T28378 Mounting Plate ..................................... 1
Pencil or Permanent Marker .............................. 1
Drill with
3
⁄
8
" Bit .................................................. 1
To secure roller table to machinery:
1. With help from an assistant, place roller table
assembly upside-down on clean, level sur-
face (see
Figure 12).
2. Adjust leg height if necessary (see Installation
& Height Adjustment, Steps 1–6).
3. Remove (4) hex bolts, (4) flange nuts, and
(4) flat washers securing one leg assembly to
roller table assembly (see
Figure 12).
Securing Roller Table to Machinery
8. Secure roller table with T28378 Mounting
Plate to machine using appropriate length
5
⁄
16
" or 8mm hex bolts, hex nuts, and washers
as needed.
Note: If machine does not have existing
mounting holes, you will need to drill them
yourself.
7. Align roller table fitted with T28378 against
suitable machine.
To avoid machine damage and possible
electrocution/shock hazard, inspect work-
bench or machine to avoid drilling into wir-
ing or important internal components.
4. Insert T28378 Mounting Plate between leg
assembly and roller table assembly, and re-
install hex bolts, flange nuts, and flat washers
removed in
Step 2. Finger-tighten for now.
5. With help from an assistant, turn roller table
assembly rightside-up.
6. Adjust location of T28378 Mounting Plate
if necessary, then secure (4) hex bolts,
(4) flange nuts, and (4) flat washers
re-installed in
Step 4 (see Figure 13).
The dynamic forces involved with process-
ing large/heavy workpieces may cause
unsecured roller tables to shift during cut-
ting operations, which could result in kick-
back injuries, depending on the type of
machine being used. To reduce this risk,
properly secure roller tables to both infeed
and outfeed side of machine.
Figure 12. Removing leg assembly to attach
T28378 Mounting Plate.
x 4
Figure 13. Installing T28378 mounting plate.
T28378
Mounting Plate
x 4