Grizzly T27338, Owner'S Manual

Page: 13 / 28

Model T27338 (Mfd. Since 01/15) -11
-
3. Open magazine cover and slide strip of
nails or staples pointed-end down into
magazine, as shown in
Figures 8–9.
Changing Guide Plate
The Model T27338 comes with a pre-
installed
25 ⁄
32
" guide plate and a 1 ⁄
2
"
un-installed guide plate. The
25
⁄
32
" guide
plate is used for
3
⁄
4
" or
25
⁄
32
" hardwood floor-
ing; the
1
⁄
2
" guide plate is used for
1
⁄
2
" or
5
⁄
8
"
hardwood flooring.
Tool Needed Qty
Hex Wrench 4mm ..................................... 1
To change guide plate:
1. DISCONNECT NAILER FROM AIR
SOURCE!
2. Pull magazine pusher back (see
Figure 10), secure it with lock button,
remove any nails/staples from maga-
zine, then unlock pusher and slide it
forward.
3. Place scrap wood under nose of nailer
and hit head cap (see
Figure 10) to
make sure magazine is empty.
Figure 10. Location of head cap.
Lock Button
Head
Cap
Magazine
Pusher
Figure 8. Loading L-cleat nails.
Magazine
Figure 9. Loading staples.
4. Push lock button and allow pusher
to slide nails/staples toward nose of
nailer.
Staples
L-Cleat Nails
Magazine Cover
Magazine
Magazine Cover