t23089 (Mfg since 11/10)
-5
-
inventory
assembly
air connection
figure 1. Model t23089 inventory.
B
A
C
description
Qty
a. Air Cut-off saw .................................. 1
b. Arbor Wrench 14mm .......................... 1
c. hex Wrench 5mm .............................. 1
section 3: setup
For periodic usage, place a few drops of
oil into the air inlet then connect it to the
air hose.
to ensure proper lubrication, reduce
moisture contamination, and maximize
tool life, we recommend that an in-line oiler
be installed to the air supply for constant
lubrication. see
figure 2 for a detailed
layout of this setup.
Fittings
Water
Separator
Air
Regulator
Automatic
Oiler
Main Air
Supply Hose
Male Female
Air
Compressor
Piping
Filter
In-Line
Your
Tool
Oiler
Filter
Regulator
Quick-Disconnect
Lead-In
Hose
(Optional)
(Optional)
figure 2. typical air supply system.
A
1
⁄
4
" npt quick-disconnect air fitting (not
included) must be installed prior to use.
prepare the fitting by applying a teflon-
type sealer, remove the plastic protective
cap from the air inlet, then install the air
fitting into the inlet.