-20-
model t23034 (mfg. since 6/10)
figure 31.
Releasing top roller.
3. With the help of an assistant, slide and lift
the top roller out from the base. remove the
workpiece from the top roller, then place the
top roller back onto the base (
figure 31).
4. move the top roller back into position and
slide the removable bushing in to secure the
top roller (
figure 32).
5. Center the roller at the gearbox end and
thread the hex bolt back into the top roller
bushing. then, tighten the jam nut against
the base to lock the hex bolt in place.
Removing Workpiece
To remove cylindrical workpieces:
1. loosen the hex bolt and jam nut that secure
the top roller at the gearbox (
figure 29).
2. slide the removable bushing outward. this
will release the top roller from the stand
(
figure 30). do not yet attempt to remove the
top roller.
The components of this machine
are very heavy and workpieces can be
cumbersome and have sharp edges. Always
wear gloves and fully support components
and workpieces. Get help if necessary.
failure to do this may result in personal
injury.
figure 29.
Hex bolt and jam nut.
figure 30.
Removable bushing release.
top roller
Bushing Bolt
Jam nut
removable Bushing
released
figure 32.
Securing top roller.
removable Bushing
secured
