t21347 2" nailer Kit
-10
-
4.
open the nailer nose by removing the
rubber nose tip, depressing the nose
release mechanism, and opening the
nose cover as shown in
figure 7
.
clearing Jammed
nails
5.
dislodge the jammed nail with a tool
that will fit in the slot on the underside
of the nose.
6.
throw the damaged nail away and
insert a new nail stick that only contains
clean, undamaged nails. do not use
dirty or damaged nails!
7.
slide the pusher back until it locks into
position.
A jammed nail must be cleared before using
the nailer again.
to clear a jammed nail from the dis-
charge area:
1.
disConnECt nAilEr FroM thE
Air supply!
2.
release the catch lever and slide the
magazine pusher back.
3.
remove the nail stick from the maga-
zine.
figure 7.
nose opened to clear a jam.
nose Cover
nose tip
nose release Clip