Grizzly T10824, Owner'S Manual, Page: 18 / 32

-18-
Model T10824 (Mfd. Since 07/14)
6. Slide new blade onto arbor, ensuring that
teeth at bottom of blade face forward, as
shown in
Figure 12.
7. Using spanner wrench and hex wrench,
install outer flange, washer, and arbor bolt,
as shown in
Figure 13. The flat side of outer
flange faces AWAY from blade. The indented
side faces TOWARD blade.
Figure 12. Example of proper blade orientation.
Arbor
Inner
Flange
Outer
Flange
Blade
Dock
Washer
Arbor
Bolt
Figure 13. Installation order of blade and related
components.
8. Pivot saw all the way down, then tighten
release screw shown in
Figure 9 on Page 17.
3. With saw in open position, as shown in Figure
10, steady arbor by inserting 24mm spanner
wrench into two holes on outer flange.
4. With free hand, use 5mm hex wrench to
loosen arbor bolt (see Figure 11).
Figure 11. Removing arbor bolt.
5. Remove arbor bolt, washer, outer flange,
and blade. Make sure inner flange remains
seated on arbor.
Figure 10. Saw in open position for blade
change.
Outer
Flange