-8-
model t10432 (mfg. since 11/10)
Inventory
Inventory (figure 1)
Qty
A. router mounting Board 3
7
⁄
8
" id .................. 1
— insert 2
5
⁄
8
" id .......................................... 1
— insert 1
1
⁄
4
" id ........................................... 1
B. Fence support ............................................ 1
c. Fence Boards ............................................. 2
D. guard ......................................................... 1
E. table ........................................................... 1
f. Fence scale tapes ..................................... 2
g. rubber Feet ............................................... 4
h. long Bottom stand Braces 27
1
⁄
4
" ............... 2
i. long top stand Braces 20
1
⁄
2
" .................... 2
J. short Bottom stand Braces 19
3
⁄
4
" .............. 2
K. short top stand Braces 15
3
⁄
4
..................... 2
L. dust port housing ...................................... 1
M. stand legs 33" ........................................... 4
N. dust port 2
1
⁄
2
"............................................. 1
The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, check
the mounting location on the machine or the
packaging materials. Sometimes parts are
pre-installed for shipping, or they become
hidden by packaging materials.
O. hardware (not shown):
— hex Bolts m6-1 x 18 (table/Braces) ....... 4
— Fender Washers 6mm (table/Braces) .... 4
— Carriage Bolts m8-1.25 x 10 (stand) .... 32
— Flat Washers 8mm (stand) ................... 32
— hex nuts m8-1.25 (stand) .................... 32
— hex Bolts m8-1.25 x 25 (Fence) ............. 6
— Flat Washers 8mm (Fence) .................... 6
— star Knobs m8-1.25 (Fence) ................... 6
— t-Bolts m6-1 x 25 (guard) ...................... 2
— Flat Washers 6mm (guard) .................... 2
— tri-Knobs m6-1 (guard) .......................... 2
— phillips head screws m5-.8 x 55 ............ 2
—starting pin ............................................. 1
— hex Wrench 3mm ................................... 1
figure 1. model t10432 inventory.
a
B
C
d
e
F
g
h
i
J
K
l
m
n
