Model T10006 50 Kg Digital Crane Scale
-6
-
SECTION 4: OPERATIONS
Scale Functions
Function Display
Action
Off/On 8.8.8.8.8 Start up, display twice
110.25 Maximum capacity, display twice
U X.XX Current battery voltage
- - - - - Wait signal
0.00
STB light will engage, ready
Turning the Scale
ON
After your crane scale has been properly
mounted, familiarize yourself with the func-
tions both on the scale and on the remote
control. Begin by holding down the
button on the scale to turn it
ON
(
Figure
4
). Each time the scale is turned on, it will
flash a series of displays. Use the table
below to familiarize yourself with the dis-
play and its meanings.
To guarantee accuracy for your crane
scale, allow it warm up without a load for
3-5 minutes.
Zero Function
Generally, your scale will read the weight
of the hook. To return your scale to zero,
press the
button on the scale (
Figure
4
), or on the
�
button on the remote
control.
Tare Function
The tare function will allow you to auto-
matically deduct the weight of the weigh-
ing platforms or containers, resulting in a
final weight of only the items that you want
weighed (the net weight). When your scale
is ready, attach your weighing platform to
the lifting hook at the bottom of the scale,
then wait until the "STB" light comes on.
Before placing any items on the platform,
deduct the weight of the platform by press-
ing the
button on the scale (
Figure 4
),
or by pressing Tare on the remote control.
After you have selected the Tare function
for the platform, the scale will return to
0.00 between loads until you turn off the
scale.
Power Saving
If the load is left at stable status, ("STB"
as shown in
Figure 4
) for longer than 15
minutes, the screen will flash "
–"
to save
power and will return to normal weighing
readings when the load is changed. If
the load is left at stable status for over 60
minutes, the scale will turn
OFF
automati-
cally.
����
����
��
��
���
����
Figure 4.
Scale face.
Hold LED Display
Load Stable LED Display
Weight in lbs
.
Remote Receiver Window
Zero LED Display
Tare LED Display
ON/OFF Button
Tare Button
Zero Button
