Copyright © JANUAry, 2011 By grizzly iNdUstriAl, iNC., rEVisEd MArCh, 2011 (ts)
Warning: no portion of this manual may be reproduced in any shape
or form Without the Written approval of grizzly industrial, inc.
(For ModEls MANUFACtUrEd siNCE 4/11) #Bl13649 priNtEd iN tAiWAN
Congratulations on your purchase of the Model g0634Xp 12" Jointer/planer! the Model g0634Xp is the
same machine as the Model g0634 but with a "cool" new look, a different type of spiral cutterhead, and
a new end-mounting fence. Except for the differences noted in this insert, all other content in the Model
g0633/g0634 manual applies to this machine. Before operating your new machine, you MUst read and
understand this insert and the entire g0633/g0634 manual to reduce the risk of serious personal injury.
If you have any questions about this manual insert or the differences between the Model G0634XP and the
Model G0633/G0634, contact our Technical Support at (570) 546-9663 or email
[email protected].
model g0634Xp
polar bear series
12" Jointer/planer
manual insert
machine inventory
After all the parts have been removed from the
crate, you should have the following items:
common components (figure 1)
Qty
a. Jointer/planer Assembly (Not shown) ........ 1
b. push Blocks ................................................ 2
c. Cutterhead guard Assembly ...................... 1
d. hardware and tools (Not shown)
— Wrenches 8/10, 12/14mm ................1 Ea
— hex Wrenches 3, 4 mm, 3/32" .........1 Ea
figure 1. Common components.
B
C
figure 2. spiral cutterhead hardware.
E
spiral cutterhead hardware (figure
2
)
e. spiral Cutterhead hardware
—indexable Carbide inserts....................... 5
—Flat hd torx screws 10-32 x
1
⁄
2
" t25 .... 10
—torx drivers t25 ..................................... 5
—t-handle Wrench
1
/
4
" .............................. 1
