Model H8124 7.2V Mini Grinder Kit
-4
-
No list of safety guidelines can be
complete. Every shop environment
is different. Always consider safety
first, as it applies to your individual
working conditions. Use this mini
grinder and other machinery with
caution and respect. Failure to do so
could result in serious personal inju-
ry, damage to equipment, or poor
work results.
Like all machinery there is poten-
tial danger when operating this
machine. Accidents are frequent-
ly caused by lack of familiarity or
failure to pay attention. Use this
machine with respect and caution
to lessen the possibility of operator
injury. If normal safety precautions
are overlooked or ignored, serious
personal injury may occur.
Additional Safety Instructions for Mini Grinder
1.
READ THIS MANUAL.
This manual
contains proper operating instructions
for this grinder.
2. OPERATION.
DO NOT force the
grinder against the workpiece. Firmly
grasp the grinder and ease it against
the workpiece using light pressure.
3. WORK AREA CONDITIONS.
DO
NOT use this grinder in a damp or wet
location. Keep work area well lit. Do
NOT use in the presence of flammable
gases or liquids.
4. GRINDER DESIGN.
DO NOT force
this tool beyond its capabilities. DO
NOT modify this tool and do not use
this grinder for any purpose for which
it was not intended.
5. AVOID UNINTENTIONAL STARTING.
Be sure the switch is in the OFF
position when not in use and before
plugging it in. DO NOT carry any tool
with your hand on the power switch,
whether it is energized or not.
6. SHARP SURFACES.
DO NOT place
hands near the tooling surfaces of the
grinder when in operation.
7. DISCONNECT POWER.
Always remove
the battery before making any adjust-
ment, changing tools, or performing
any maintenance to the grinder.
8. MACHINE INSPECTIONS.
Perform
machine inspections and maintenance
service as required.
9. FLEX SHAFT.
DO NOT use the flex
shaft with a tight bend. This may
cause binding and damage the inner
spindle.
10. CLAMP THE WORKPIECE.
DO NOT
hold the workpiece with one hand and
operate the grinder with the other.
11. ATTEND TO YOUR GRINDER.
Never
walk away from the grinder and leave
the tool running.
12. TEST RUN.
Always test run the grind-
er before starting any work.
Summary of Contents for H8124
Page 2: ......
