H3143 Wax Buffer
-4
-
OPERATION
Please take the time to become familiar
with this instruction manual. The informa-
tion contained will allow you to get the
maximum enjoyment and use from your
new tool.
Accessories
Included with the Model H3143 Wax Buffer
are two bonnets: the terry cloth bonnet is
used to wax and the synthetic wool bonnet
is used to buff the wax.
Using The Buffer
Never use abrasive wax or polish
when using this tool. Damage to the
paint may occur.
Always follow the manufacturer’s
instructions when applying wax.
Failure to follow the instructions
could result in damage to the surface
you are waxing.
1.
Evenly apply wax to the terry cloth bon-
net. DO NOT apply the wax directly to
the work surface.
2.
WITHOUT turning the buffer on, set it
on the work surface.
3.
Place the power cord over your shoul-
der to keep it off the work surface.
4.
Turn the buffer on and begin buffing a
large flat area such as the hood.
5.
Buff in a back and forth pattern, allow-
ing the buffer to glide over the work sur-
face.
DO NOT exert excessive pres-
sure on the buffer!
6.
Buff hard-to-reach areas by hand.
7.
Once applied, allow the wax to form a
haze on the work surface.
8
. Replace the terry cloth bonnet with the
synthetic wool cap.
9.
Buff the waxed surface in the same
manner it was applied.
DO NOT exert
excessive pressure on the buffer!
About Your New Buffer
