background image

Model h2935/h2936 (Mfg. since 2/12)

-5-

The information contained herein is deemed accurate as of 1/31/2012 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 2

Model H2936

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL H2936 28" X 39" DOWNDRAFT TABLE

Product Dimensions:

Weight.............................................................................................................................................................. 209 lbs.

Width (side-to-side) x Depth (front-to-back) x Height............................................................... 39-3/8 x 28 x 39-3/8 in.

Footprint (Length x Width)..................................................................................................................... 28 x 39-3/8 in.

Shipping Dimensions:

Type..................................................................................................................................... Cardboard/Wood Runner

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 252 lbs.

Length x Width x Height....................................................................................................................... 30 x 41 x 36 in.

Electrical:

Power Requirement........................................................................................................... 120V, Single-Phase, 60 Hz

Full-Load Current Rating....................................................................................................................................... 8.5A

Minimum Circuit Size.............................................................................................................................................. 15A

Switch........................................................................................................................ Grizzly Toggle with Lockout Key

Switch Voltage..................................................................................................................................................... 120V

Cord Length.......................................................................................................................................................... 12 ft.

Plug Included.......................................................................................................................................................... Yes

Included Plug Type.................................................................................................................................... NEMA 5-15

Motors:

Main

Type........................................................................................................................................................... Open

Horsepower............................................................................................................................................. 1/2 HP

Voltage....................................................................................................................................................... 120V

Phase....................................................................................................................................................... Single

Amps........................................................................................................................................................... 8.5A

Speed................................................................................................................................................ 1725 RPM

Cycle......................................................................................................................................................... 60 Hz

Number of Speeds............................................................................................................................................ 1

Power Transfer ............................................................................................................................... Direct Drive

Bearings....................................................................................................................... Shielded and Lubricated

Main Specifications:

Operation Info

Air Suction Cap.................................................................................................................................. 1490 CFM

First Stage Filter Micron................................................................................................................................... 1

Second Stage Filter Micron........................................................................................................................... 0.3

Filter Efficiency..................................................................................................... 25-30 Percent ASHRAE 52.1

Impeller Type................................................................................................................................ Squirrel Cage

Impeller Size.......................................................................................................................................... 9-1/2 in.

Summary of Contents for H2935






































Reviews: