21
GB
Replacement parts/Accessories
Spare parts and accessories can be obtained at
www.grizzly-service.eu
If you have any other questions, contact the ”Grizzly Service-Center”.
Troubleshooting
Problem
Possible Cause
Error correction
Pump does not
start
Mains voltage missing
Check the socket, mains connec-
tion cable, line, mains plug, repair
to be carried out by qualified elec
-
trician if necessary.
Pump is not switched on.
Turn pump on at
on/off switch (
7)
On/off switch (
7) may be
defective
repair to be carried out by quali-
fied electrician if necessary.
Pump does not
supply
Pump chamber without water
Fill water
Pump, suction line or suction
filter blocked
Clean pump
Suction line is leaky or dam-
aged
Check the suction line and seal or
replace if necessary
Suction height too high
Check suction height
Fluid quantity
insufficient
Pumping capacity reduced due
to very dirty or abrasive admix-
tures of water
Clean pump
Pump switches
off after short
run time
Engine protection switches the
pump off due to very strong
water contamination.
Switch device off and pull power
plug.
The pump is designed exclusively
for the supply of clarified water
and rain water.
Water temperature is too high,
engine protection switches the
device off.
Pay attention to maximum tem-
perature of 35 °C!
