<..)-(,;ddiH]ZVg
"&,"
7.
GZeZVi
Step 6
dci]Zdi]Zgh^YZhdi]Z\Ve^h
jc^[dgbVXgdhhi]ZaZc\i]d[i]ZWaVYZ#
8.
I^\]iZci]Z[djgiVWaZWdaihVcYYdjWaZX]ZX`
i]Z\VeidbV`ZhjgZ^i]VhcdiX]Vc\ZY#
Figure 19.
BZVhjg^c\\VeWZilZZcWaVYZh#
<Ve9^hiVcXZ
4.
Add`^c\ WZ]^cY i]Z ]daY"Ydlc! bV`Z hjgZ
i]ZildWaVYZhhjg[VXZhVeeZVgidbV`Za^\]i
XdciVXiVaai]ZlVnVXgdhhi]ZaZc\i]#
·>[i]ZnYd!egdXZZYidi]ZcZmihiZe#
·>[ ndj dWhZgkZ V \Ve WZilZZc i]Z ild
WaVYZ hjg[VXZh! bdkZ id i]Z cZmi hZXi^dc
Adjusting Blade Bow
hZXi^dc#
5.
Jh^c\Vh]ZZid[eVeZg!Xdc[^gbi]Vindj]VkZ
egdeZgXdciVXiWnbV`^c\hZkZgVaXjihVadc\
i]ZaZc\i]d[i]ZWaVYZ#I]Zh]ZVgh]djaYXji
i]gdj\]i]ZeVeZgXaZVcan#
6.
Ijgci]ZiVWaZVY_jhibZcihXgZlhidbdkZi]Z
[^mZY WaVYZ VlVn [gdb i]Z bdk^c\ WaVYZ hd
ndj ]VkZ V \Ve d[ %#%%'# 8]ZX` i]^h bZV"
hjgZbZci l^i] V [ZZaZg \Vj\Z Vh h]dlc ^c
Figure
19
#
Note:
0.002" is a good starting point for
most operations. The gap width will change,
however, depending on the type and gauge
of the material being sheared. This is a trial-
and-error process. Test with scrap pieces
until you achieve satisfactory results.
