-2-
G8689 Mini Mill (Mfg. 8/06+)
INTRODUCTION
We stand behind our machines. If you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
If you have any comments regarding this manual,
please write to us at the address below:
Grizzly Industrial, Inc.
C
/
O
Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [email protected]
Contact Info
Machine Description
Manual Accuracy
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings, and
photographs of the machine we used when writ-
ing this manual. However, sometimes errors do
happen and we apologize for them.
Also, owing to our policy of continuous improve-
ment,
your machine may not exactly match the
manual. If you find this to be the case, and the dif-
ference between the manual and machine leaves
you in doubt, check our website for the latest
manual update or call technical support for help.
Before calling, find the manufacture date of your
machine by looking at the date stamped into the
machine ID label (see below). This will help us
determine if the manual version you received
matches the manufacture date of your machine.
For your convenience, we post all available man-
uals and manual updates for free on our website
at
www.grizzly.com. Any updates to your model
of machine will be reflected in these documents
as soon as they are complete.
Manufacture Date
of Your Machine
The mill is used to remove material from metal
workpieces to form shapes. Tooling is inserted
into the spindle of the head, which is positioned
above the table and workpiece.
During most operations, the tooling rotates in the
spindle above the workpiece while the opera-
tor moves the workpiece, which is clamped to
the table, in any combination of two paths of
table movement—longitudinal (X-axis) and cross
(Y-axis). Vertical travel of the spindle is controlled
with the micro and rapid downfeed controls.
Summary of Contents for G8689
Page 15: ...G8689 Mini Mill Mfg 8 06 13 Hardware Recognition Chart...
Page 40: ...38 G8689 Mini Mill Mfg 8 06...
Page 44: ......
