Model G4179 (Mfd. Since 01/22)
-13-
Figure 4. Power feeder inventory.
A
C
B
Figure 5. Base inventory.
E
D
F
G
H
I
J
K
L
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory (Figures 4–5)
Qty
A. Power Feeder Assembly ............................ 1
B. Extra 26T/34T Gears (Behind Cover) ....1 Ea
C. Elbow Joint Assembly ................................ 1
D. Base and Column Assembly ...................... 1
E. Crank and Leadscrew Assembly ................ 1
F. T-Handle ..................................................... 1
G. Horizontal Column Assembly ..................... 1
H. Base Bolt Pattern Template ........................ 1
I. Cap Screws M8-1.25 x 20 .......................... 2
J. Handcrank Handles .................................... 2
K. Flat Washer 13mm ..................................... 1
L. Hex Wrench 4mm ....................................... 1
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Summary of Contents for G4179
Page 40: ......
