-18-
Model G1163P (Mfd. Since 7/15)
SECTION 4: OPERATIONS
Do NOT put hands or
small objects near inlet
openings during opera-
tion. Objects sucked
into the inlet will hit the
impeller blade. Failure to
heed this warning could
result in personal injury
or property damage.
General
Operating the Model G1163P is simple and
straightforward. Move the dust collector near the
machine to a location where it will not interfere
with the workpiece being processed, connect the
duct, connect the ducting ground, and you are
ready to begin.
If you decide to use the dust collector as a sta-
tionary unit, keep in mind that it is intended for
single machine use and is not designed to draw
dust through long runs and multiple ports simul-
taneously. We do not recommend using ducting
longer than 10 feet. Otherwise, dust collection
efficiency will be greatly reduced.
When the dust collector is not in use, unplug the
power cord from the power source. Place the
cord away from potential damage sources, such
as high traffic areas, sharp objects, heat sources,
harsh chemicals, water, damp areas, etc.
Machine Storage
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Summary of Contents for G1163P
Page 32: ......
