Grizzly G1163, Owner'S Manual

Page: 15 / 32

Model G1163/G1163P (Mfg. Since 9/12)
-13-
Box 1: Qty
A. Collector Body and Fan/Motor assembly
(Not Shown) ................................................ 1
B. Base plate .................................................. 1
C. Casters ....................................................... 4
d. Collection Bag ............................................ 1
E. Bag Clamp .................................................. 1
f. Foam Strip 4 x 20 x 430mm ....................... 1
placement Location
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. See
figure 7 for the minimum
working clearances.
Site Considerations
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
figure 7. Minimum working clearances.
44"
18"
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Hardware and Tools (and Location)
•
acorn Nuts
5
⁄
16
"-18 (Casters) ....................... 4
• Flat Washers
5
⁄
16
" (Casters) ........................ 4
• Flange Bolts
1
⁄
4
"-20 X
1
⁄
2
" (Fan/Motor) ........ 4
• open-End Wrench 10 x 12mm ................... 1
figure 6. Model G1163/G1163p inventory.
B
C
D
E
F