Model G0925 (Mfd. Since 02/20)
-15-
Assembly
To assemble machine:
1. Attach column to base using (3) M8-1.25 x 20
hex bolts (see
Figure 9).
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
Figure 9. Column attached to base.
x 3
3. Lift headstock and fit it onto top of column
(see
Figure 11). Rotate headstock so spindle
is over table.
2. Slide table assembly onto column, centering
table over base (see
Figure 10), and secure
with table lock handle.
Figure 10. Table secured on column.
Column
Table Assembly
Table Lock
Handle
Figure 11. Headstock placed on column.
4. Tighten (2) pre-installed set screws to secure
headstock to column (see
Figure 12).
Figure 12. Location of set screws that secure
headstock to column.
x 2
Summary of Contents for G0925
Page 44: ......
