For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL G0871
ROLLER STAND FOR G0869
BENCHTOP TABLE SAW
INSTRUCTIONS
COPYRIGHT © FEBRUARY, 2019 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 01/19) #WK20229 PRINTED IN TAIWAN
Introduction
Model G0871 Roller Stand allows you to quickly
and easily mount your Model G0869 Benchtop
Table Saw onto a stable, yet portable work sur-
face. To mount Model G0869 to this stand, follow
the instructions below.
Note: This Roller Stand is designed only for use
with the Model G0869 Benchtop Table Saw or as
a replacement for the stand that comes with Model
G0870 Portable Table Saw. Do not attempt to use
Model G0871 as a stand for any other machine.
V1.02.19
Description Qty
A. Roller Stand (Not Shown) ........................... 1
B. Left & Right Handles (Not Shown) .......1 Ea.
C. Carriage Bolts M8-1.25 x 40 ....................... 4
D. Button Head Cap Screws M8-1.25 x 16 ..... 2
E. Hex Wrench 5mm ....................................... 1
F. Flat Wrench 10mm/13mm .......................... 1
G. Wheels ....................................................... 2
H. Lock Nuts M8-1.25 ................................... 10
I. Button Head Cap Screws M8-1.25 x 40 ..... 4
J. Flat Washers 8mm ..................................... 6
Inventory (Figure
1
)
Assembly
1. Attach each wheel to axle with (1) 8mm
flat washer and (1) M8-1.25 lock nut (see
Figure 2).
2. Attach left handle to stand body with (2)
M8-1.25 x 16 button head cap screws (see
Figure 2).
3. Attach right handle to stand body with (4)
M8-1.25 x 40 button head cap screws and
(4) M8-1.25 lock nuts (see
Figure 2).
Figure 1. Model G0871 inventory.
C
I
J
H
D
G
F
E
Figure 2. Model G0871 assembly.
x 4
x 2
Left Handle
Right Handle
