1. Push leg lock buttons in and unfold legs until
lock buttons click into place in holes shown in
Figure 3.
Mounting Table Saw to Stand
Figure 3. Location of stand legs, leg lock
buttons, and leg lock holes.
Leg Lock Button
(1 of 4)
Hole
(1 of 4)
Leg (1 of 4)
2. Place table saw unit on stand. Secure with
(4) M8-1.25 x 40 carriage bolts, (4) 8mm
flat washers, and (4) M8-1.25 lock nuts (see
Figure 4).
Note: Table saw mounts to stand facing
either direction—with stand wheels oriented
to the left or to the right.
Figure 4. Model G0869 mounted on Model
G0871 Roller Stand.
x 4
