Grizzly G0842, Owner'S Manual

Page: 6 / 56

-4-
Model G0842 (Mfd. Since 04/18)
Controls &
Components
refer to
figures 1–5 and the following descrip-
tions to become familiar with the basic controls of
this machine.
To reduce your risk of
serious injury, read this
entire manual bEfORE
using machine.
D. Quill: holds Mt#2 centers or tooling. Moves
toward and away from spindle.
E. Quill Locking Nut: Secures quill in position.
f. Tailstock Handwheel: rotates to move quill
toward and away from spindle.
G. Tailstock Clamp bolts (2): Secure position
of tailstock along bed.
figure 2. tailstock controls.
A. ON/Off Switch w/Disabling Key: turns
motor ON when flipped up; turns motor OFF
when pressed down. remove yellow key to
disable switch so motor cannot start.
b. Spindle Speed Lever: adjusts spindle speed
from low to high within range governed by
pulley belt position (see
Page 33 for more
information).
C. Spindle: accepts Mt#2 centers or 1" x 8
tpi (rh) tooling for mounting workpieces.
rotates counterclockwise (down, toward
front of machine).
figure 1. headstock controls.
a
B
C
Headstock
Tailstock
H. Tool Rest: provides stable platform for cut-
ting tools.
i. Tool Rest Lock Handle: Secures tool rest in
position.
J. Tool Rest base Locking bolt: Secures tool
rest base in position along bed.
figure 3. tool rest controls.
h
J
i
Tool Rest
F d E
g