-24-
Model G0810 (Mfd. Since 10/15)
SECTION 4: OPERATIONS
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Operation Overview
The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual and seek additional training from expe-
rienced machine operators, and do additional
research outside of this manual by reading "how-
to" books, trade magazines, or websites.
To complete typical operation, operator does
following:
1. Examines workpiece to make sure it is suit-
able for drilling.
2. Installs correct tooling for operation.
3. Firmly secures workpiece to table using a
vise or T-slot clamps.
4. Adjusts table height, then locks it in place.
5. Puts on required safety glasses and face
shield.
6. Connects machine to power.
7. Selects spindle speed, properly tensions
V-belts, then turns machine
ON.
8. Begins drilling operations.
9. When finished, turns machine OFF, and dis-
connects machine from power.
Summary of Contents for G0810
Page 60: ......
