Grizzly G0766 Owner'S Manual Download Page 38 | Manualshive

Page: 38 / 52

background image

-36-

Model G0766 (Mfd. Since 11/17)

Recommended Metal Protectants

G5562—SLIPIT

®

1 Qt. Gel

G5563—SLIPIT

®

12 Oz. Spray

G2871—Boeshield

®

T-9 12 Oz. Spray

G2870—Boeshield

®

T-9 4 Oz. Spray

H3788—G96

®

Gun Treatment 12 Oz. Spray

H3789—G96

®

Gun Treatment 4.5 Oz. Spray

Figure 54. Recommended products for protect-
ing unpainted cast iron/steel part on machinery.

Figure 55. Model T21884 Turning Basics for

Furniture Makers.

T21884—Turning Basics for Furniture Makers
As a veteran furniture maker, Steve Shanesy took
up  turning  to  expand  the  repertoire  of  his  wood-
working skills. After several years, and hundreds
of  projects  later,  Steve  decided  to  create  a  DVD
that  would  demonstrate  the  basics  of  spindle
turning  so  that  you  too  can  expand  the  types  of
projects  you  build.  This  "trailer"  shows  all  of  the
projects  you'll  learn  to  build  and  the  skills  you'll
learn to master in this essential DVD.

H7940—3-pc. Lathe Scraper Set
This set is ideal for bowl turning and detail work.
Each  chisel  measures  roughly  16"  long  with  10"
ash  handles  and  high  speed  steel  blades.  Set
includes  one  round,  one  curved,  and  one  90°
corner chisel.

Figure 52. Model H7940 3 Pc. Scraper Set.

G1069—Live Center Set
A  blend  of  quality  and  convenience,  this  Live
Center  Set  offers  seven  interchangeable  tips.
High quality needle bearings prolong tool life and
special  tool  steel  body  and  tips  are  precision-
ground. Supplied in box. Morse Taper: #2.

Figure 53. Model G1069 Live Center.

«
...
36
37
38
39
40
...
»

Summary of Contents for G0766





















































Reviews:

No comments

Related manuals for G0766

Brand: WABECO Pages: 39

Brand: Wadkin Pages: 9

Brand: Jet Pages: 69

Brand: Ray Foster Pages: 4

Brand: Hafco Metalmaster Pages: 110

Brand: MachineryHouse Pages: 66

Brand: Hardinge Pages: 104

Brand: Westfalia Pages: 30

Brand: WoodFast Pages: 9

Brand: WoodFast Pages: 18

Brand: WoodFast Pages: 27

Brand: Woodstock Pages: 74

Brand: HARVEY Pages: 28

Brand: Grizzly Pages: 10

Brand: Grizzly Pages: 10

Brand: Grizzly Pages: 44

Brand: Grizzly Pages: 2

Brand: Grizzly Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands