Grizzly G0720R, Owner'S Manual

Page: 30 / 56

-28-
Model G0720R (Mfg. Since 11/10)
SECTION 5: ACCESSORIES
ACCESSORIES
Figure 26. Horizontal milling worktable.
Note: Model G0619 Mill/Drill Shown.
H8179—Horizontal Milling Table
Take advantage of the G0720R tilting headstock
feature. Install this lifted cast-iron milling table for
the correct workpiece height when making special
tilted headstock milling operations.
H8179
G2861—Face Mill
G4051—Carbide Insert for Face Mill
This 2
1 /
2
" face mill accepts four carbide inserts
(not included). Comes with an R-8 arbor.
Figure 28. G2861 Face Mill.
Some aftermarket accessories can be
installed on this machine that could cause
it to function improperly, increasing the risk
of serious personal injury. To minimize this
risk, only install accessories recommended
for this machine by Grizzly.
NOTICE
Refer to the newest copy of the Grizzly
Catalog for other accessories available for
this machine.
T10057—Tapping Attachment
Safely use your benchtop milling machine to tap
threads into blind holes. An internal adjustable
clutch mechanism allows you to adjust slip, so if
a tap bottoms in a blind hole before the spindle is
reversed, the clutch slips without the tap shearing
off. You can tap
3
⁄
16
" to
1
⁄
2
" or M5 to M12 threads.
Maximum speed is 700 RPM.
Note: To use this tapping attachment on the
Model G0720R mill, you must purchase the G1427
R-8/ MT #2 Morse Taper sleeve.
Figure 27. T10057 Tapping Attachment.