Grizzly G0707, Owner'S Manual

Page: 24 / 48

-22-
Model G0707 (Mfd. Since 01/21)
Control Panel
A. Dust Collector Switch: Starts and stops the
dust collector.
B. Light Switch: Turns the dual-bulb fluores-
cent work light system
ON and OFF.
C. Power Switch: Toggles power to the circuit
board and the rest of system ON and OFF.
D. Fuse: Protects the circuit board and controls
from overload.
E. Power Light: Illuminates when power is sup-
plied to the blasting cabinet.
F. Circuit Light: Illuminates when the machine
controls are ready for use.
G. Door-Closed Light: Illuminates when both
side doors are closed, indicating that the
blast cabinet is sealed.
H. Fixed Gun Light: Illuminates when the fixed
gun is in use.
I. Hand-Held Gun Light: Illuminates when the
hand-held gun is in use.
J. Piezometer Gauge: Indicates the applied
air pressure to the blast cabinet for blasting,
which typically will be set between 60-80
PSI.
K. Air Regulator Knob: When turned clock-
wise, the air pressure in the blast gun is
increased. When turned counterclockwise,
the air pressure is decreased.
L. Foot Switch: Controls fixed-blast gun air ON
and OFF.
Figure 18. Control panel.
A
B
C
D
E F G H I
J
K
L