g0649 Welding downdraft table
-5-
identification
figure 1.
Features.
a
A. Rolling-filter Supply cabinet:
location for
the fresh roll of filter paper.
b. Slag Drawer:
location for the removable
stainless steel spark arrestor screen.
c. 110v Receptacle:
provides 110V aC power
for the work lamp and hand tools.
D. Digital control Panel:
provides location for
machine operations.
E. Out of filter Lamp:
lights when the roller-
type filter has run out and needs changing.
f. EMERGEncy STOP button:
Shuts down
the machine in the event of an emergency.
G. frequency Drive control Panel:
reduces
fan suction CFM when welding with flux
gasses.
h. vibrating filter Service Lamp:
lamp lights
when filter needs cleaning or replacement.
i. hEPA filter Service Lamp:
lamp lights
when filter needs cleaning or replacement.
J. Work Lamp:
lamp provides general
workspace illumination.
K. vented Work Table w/Ground:
grounded
table allows for clamp-free welding.
L. Spark Shield:
allows for shelving and lamp
support.
M. Side Shield:
Both left and right spark shields
are hinged to allow for long workpiece
clearance.
n. Main Electrical box:
Contains the master
electrical system.
O. vibrating filter Dust Drawer:
Clean out
location for the vibrating filter waste material.
P. caster Wheels:
allows for easy machine
relocation and parking.
Q. vibrating filter & hEPA filter housing:
location for the pleated filters.
R. Rolling-filter Recovery cabinet:
allows
access to the spent rolling filter material.
S. Motor and fan Storage cabinet:
provides
access to the fan motor and allows for
general storage.
C
d
E F
g
h
J
i
K
B
S
r
Q
p
o
n
M
l
