Grizzly G0639, Owner'S Manual

Page: 14 / 32

-12-
Model G0639 22-Ton Hydraulic Log Splitter
14
. Lock the beam in place in the horizontal posi-
tion with the spring loaded lock pin shown in
Figure 11
.
12
. Using a mechanical lifting device that can
support at least 1000 lbs., lift the cylinder and
beam assembly and secure it in the hinge
with the hinge pin.
13 . Bend the hinge pin cotter pin so the hinge pin
cannot fall out.
Figure 11
. Beam lock.
8
. Install the rear leg onto the frame with the
M10-1.5 x 75 pivot bolt, flat washer, and lock
nut as shown in
Figure 8
.
9
. Raise the leg and lock it in place with the
lock pin and 2 x 15mm cotter pin as shown in
Figure 8
.
Figure 10
. Beam and cylinder hinge pin.
Beam and Cylinder
Hinge Pin and Cotter Pin
Figure 9
. Main lifting location.
10
. This cylinder and beam assembly is top
heavy, so loop a lifting strap rated for at least
1000 lbs through the front beam lock eyes at
the location shown in
Figure 9 .
Figure 8 . Rear leg installation.
Pivot Bolt
Rear Leg
Lock Pin
11 . Add additional lifting straps or chains as
required for your lifting apparatus so the
beam can be lifted without a sudden load
shift.