Grizzly G0609X, Manual Insert

Page: 59 / 73

-44-
G0609 12" Parallelogram Jointer
4.
Loosen the fasteners that hold the motor to
the brackets shown in Figure 63 .
5.
Shift the motor horizontally as needed to align
the motor pulley with the cutterhead pulley.
6. Tighten the fasteners that hold the motor to
the brackets. V-belts should be parallel and
aligned as shown in
Figure 62 .
7. Adjust the pulleys again, if necessary, until
they are coplanar (parallel and aligned) with
each other.
8. Close the pulley cover.
Figure 63 . Motor mount fasteners for adjusting
pulley alignment.
Fasteners