Grizzly G0602 Owner'S Manual Download | Manualshive

Page: 60 / 100

background image

-54-

Model G0602/G0752 (Mfd. Since 03/17)

Leadscrew & Carriage Rack

Oil Type .... Grizzly T23962 or ISO 68 Equivalent
Oil Amount ......................................... As Needed
Lubrication Frequency ................................. Daily

Before lubricating the leadscrew and carriage
rack (see

Figure 84), clean them first with min-

eral spirits. Use a stiff brush to help remove any
debris or grime. Apply a thin coat of oil along
the length of the carriage rack. Use a stiff brush
to make sure oil is applied into the leadscrew
threads.

Note: In some environments, abrasive material
can become caught in the leadscrew lubricant and
drawn into the half nut. In this case, lubricate the
leadscrew with a quality dry lubricant.

Figure 85. Compound bottom slide.

Compound Slide

Oil Type .... Grizzly T23962 or ISO 68 Equivalent
Oil Amount ............................................Thin Coat
Lubrication Frequency ................................. Daily

Use the handwheel to move the compound slide
all the way toward you (see

Figure 85), then wipe

clean the bottom slide with a rag and mild solvent.
Apply the lubricant and move the compound slide
back and forth to distribute the oil.

Figure 84. Leadscrew, rack and bedways.

Rack

Leadscrew

Bedways

Bedways

Oil Type .... Grizzly T23962 or ISO 68 Equivalent
Oil Amount ......................................... As Needed
Lubrication Frequency ................................. Daily

Before lubricating the bedways (see

Figure 84),

clean it with mineral spirits. Apply a thin coat
of oil along the length of the bedway. Move the
steady rest, carriage, and tailstock to access the
entire length of the bedways.

Bottom Slide

«
...
58
59
60
61
62
...
»

Summary of Contents for G0602





































































































Reviews:

No comments

Related manuals for G0602

Brand: Laguna Tools Pages: 69

Brand: South bend Pages: 144

Brand: GRS Pages: 2

Brand: Bench Power Tools Pages: 10

Brand: Automate Pages: 32

Brand: AXMINSTER WORKSHOP Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands