Grizzly G0479, Manual

Page: 19 / 36

G0578 40" Pan and Box Brake 13
Figure 7. Base extension bracket installed onto
main body (one of two brackets shown).
Figure 6. Location on main body to install base
extension brackets.
2. Line up the bracket holes ( Figure 6 ) with
the holes on the bottom of the main body
legs and secure with the four cap screws, as
shown in
Figure 7
.
Mounting to Floor
Although not required, we strongly recommend
that you mount your new pan and box brake to
a floor. Use the two holes in the base extension
brackets and the two holes under the foot pedal
lock, shown in
Figure 8, as a guide for drilling.
Figure 8. Floor mounting holes.
Because this is an optional step and floor materi-
als vary, floor mounting hardware is not included.
To ensure accurate operation results, make sure
your mounting location is as level as possible and
that you provide adequate work room all around
the pan and box brake.
Continued on next page