Model G0443 (Mfg. Since 11/09)
-19-
12.
Attach the outlet port and filter L-braces to
the blower housing with the outlet gasket
between the outlet port and the housing, as
shown in
Figures 18–19
, using (8)
5
⁄
16
"-18 x
1" hex bolts, (16)
5
⁄
16
" flat washers, and (8)
5
⁄
16
"-18 hex nuts.
Note:
One of the braces attaches directly to
the housing with the following hardware: (2)
5
⁄
16
"-18 x 1" hex bolts, (4)
5
⁄
16
" flat washers,
and (2)
5
⁄
16
"-18 hex nuts.
13.
Mount the filter to the L-braces with the brace
gaskets between them, as shown in
Figure
20
, using (4)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and (4)
5
⁄
16
" fender washers.
Figure 20.
Mounting filters to the braces.
Brace Gasket Here
Figure 18.
Outlet port and filter L-braces
installed.
Figure 19.
Model G0443 outlet port and filter
L-braces installed.
Outlet Gasket Here
14.
Apply the 3 x 15mm foam tape to the edges
of the outlet port and the canister adapter, as
shown in
Figure 21
.
Note:
It may be necessary to reposition the can-
ister L-braces down one bolt hole or shorten the
length of the longer piece of flexible hose to acco-
modate the bend in the hose.
Figure 21.
Foam tape applied to the outlet port
and canister adapter.
Foam
Tape
x 4