![Grizzly ERM 1743-20 Translation Of The Original Instructions For Use Download Page 33](http://html.mh-extra.com/html/grizzly/erm-1743-20/erm-1743-20_translation-of-the-original-instructions-for-use_2266787033.webp)
33
NI
IE
GB
Trouble Shooting
Problem
Possible Cause
Fault Fixing
Equipment
does not start
Power is off
Check the socket, cable, wire
and plug and have any repairs
carried out by an electrician
Defective start lever
(
A
15)
Repair by customer services
Worn carbon brushes
Defective motor
Grass too long
Set a greater cut height. Lift
the front wheels slightly by
pressing down on the handle
bar.
Motor stops
Blockage by foreign
object
Remove the foreign object
Result
unsatisfactory
or motor
labours
Cut height too low
Set a higher cut height
Blade (
I
19) blunt
Have the blade (
I
19)
sharpened or replace it
Blade (
I
19) area blocked
Clean the equipment
Blade (
I
19) assembled
incorrectly
Install the blade (
I
19)
correctly
Blade (
I
19)
fails to turn
Blade (
I
19) blocked by
grass
Remove the grass
Blade screw (
I
18) loose
Tighten the blade screw (
I
18)
Strange
noises, rattling
or vibrations
Blade screw (
I
18) loose
Tighten the blade screw (
I
18)
Blade (
I
19) damaged
Replace the blade (
I
19)
Level indicator
(
E
17) does
not work
Contamination
Cleaning with a soft brush. The
level indicator must close by
itself, if it was opened.
Summary of Contents for ERM 1743-20
