Grizzly EKS 710 T, Original Instructions For Use

Page: 141 / 204

GB
141
Maintenance intervals
Carry out the maintenance work listed
in the table below at regular intervals.
Regular maintenance of your equipment
extends the lifespan of the equipment. You
will also achieve optimum cutting perfor-
mances and avoid accidents.
Sharpening the cutting teeth
Leave the resharpening of a saw chain to
a specialist or proceed according to the
instructions for your saw chain sharpener.
Resharpening a saw chain takes practice.
If in doubt, it is preferable to replace the
saw chain.
Changing the saw chain
Never fix a new saw chain on a
worn set of teeth or on a damaged
or worn blade.
1. Switch off the equipment and discon -
nect from the mains.
a specialist workshop. Use
only original Grizzly replace-
ment parts. Allow the machine
to cool before all maintenance
and cleaning work. There is a
risk of burns!
Wear gloves with cut protection
when handling the saw chain.
There is a risk of injury.
Cleaning
Do not use solvents or petrol for
cleaning. These could damage the
equipment.
• Clean the surface, ventilation openings
and handles of the equipment with a
dry cloth, brush or hand brush.
• Only dry wipe the saw chain. After
cleaning, lightly oil the saw chain with
chain oil.
Apply individual drops of oil to the
joints and the points of the teeth on the
individual chain links.
Table of maintenance intervals
Machine Part Action
Before
each use
After 10 ope-
rating hours
Komplette Maschine Check condition, replace damaged
parts if necessary

Accessible screws
and nuts
Tighten

Chain wheel Check, replace if necessary

Saw chain
Check, oil, sharpen or replace if
necessary

Blade Check, turn, clean, oil
 