Grizzly Tools ERM 1743-20, Translation Of The Original Instructions For Use

Page: 33 / 164

33
GB
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment does
not start
Power is off
Check the socket, cable, wire and
plug and have any repairs carried
out by an electrician
Defective start lever
(
A
15)
Repair by customer services
Worn carbon brushes
Defective motor
Grass too long
Set a greater cut height. Lift the
front wheels slightly by pressing
down on the handle bar.
Motor stops Blockage by foreign object Remove the foreign object
Result unsatis-
factory or motor
labours
Cut height too low Set a higher cut height
Blade (
I
19) blunt
Have the blade (
I
19) sharpened
or replace it
Blade (
I
19) area blocked
Clean the equipment
Blade (
I
19) assembled incor-
rectly
Install the blade (
I
19) correctly
Blade (
I
19) fails
to turn
Blade (
I
19) blocked by grass Remove the grass
Blade screw (
I
18) loose Tighten the blade screw (
I
18)
Strange noises,
rattling or vibra-
tions
Blade screw ( I 18) loose Tighten the blade screw ( I 18)
Blade (
I
19) damaged Replace the blade (
I
19)
Level indicator
(
E
17) does not
work
Contamination
Cleaning with a soft brush. The
level indicator must close by itself,
if it was opened.