105
UK
Symbols in the manual
Warning symbols with informa
-
tion on damage and injury pre
-
vention.
Instruction symbols (the instruc-
tion is explained at the place of the
exclamation mark) with information
on preventing damage.
Help symbols with information on
improving tool handling.
General Safety Information for
Power Tools
WarnIng! Read all safety infor
-
mation and instructions.
Failure
to adhere to the safety informa-
tion and instructions may result in
electric shock, fire and/or serious
injuries.
.
The term „power tool“ in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
Keep all safety information and in
-
structions for future reference.
Work area safety
•
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
•
Do not operate power tools in ex
-
plosive atmospheres, such as in
the presence of flammable Iiquids,
gases or dust.
Power tools create
sparks which may ignite the dust or
fumes.
•
Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.
Electrical safety
CAUTION! The following states
how to avoid accidents and injuries
due to electric shock:
•
Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools.
Unmodified plugs and matching
outlets will reduce risk of electric shock
•
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or
grounded.
•
Do not expose power tools to rain
or wet conditions.
Water entering
a power tool will increase the risk of
electric shock.
•
Do not abuse the cord. Never use
the cord for carrying, pulling or un
-
plugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts.
Damaged or entan-
gled cords increase the risk of electric
shock.
•
When operating a power tool out
-
doors, use an extension cord suit-
able for outdoor use.
Use of a cord
suitable for outdoor use reduces the
risk of electric shock.
•
If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply.
Use of an RCD
reduces the risk of electric shock.
• Where possible, connect the equip-
ment only to a plug socket with a leak-
age-current-operated circuit breaker
(FI switch), with a rated current of not
more than 30 mA.
• If the power cable for this equipment
Summary of Contents for EHS710-69 R
Page 2: ...2 11 8 4 7 6 1 11 1 2 3 4 5 6 7 8 9 10...
Page 140: ......
