28
GB
5. To switch on, press the power
switch (17) and hold it down
while pressing the safety
switch (18) against the bow-
type handle (1). Release the
power switch (17).
6. To switch the apparatus off, let
go of the security switch (18).
After switching off the equip
-
ment, the blade continues to
turn for several seconds. Do not
touch the moving blade. There
is a risk of injury.
Indicator charge level
The remaining charge of the battery can
be viewed on the battery charge level in-
dicator (19) during operation. It is located
at the upper handle (1), facing the user.
The number of illuminated LED lights
shows the charge level of the battery.
Charging process
This battery-powered lawnmo
-
wer is part of the Grizzly 40 V
range.
Other devices from this product
range can be operated with the
same batteries.
The following devices are
compatible:
- Cordless Hedge Trimmer
AHS 4055 Lion
- Cordless Lawn Trimmerr
ART 4032 Lion
- Battery-operated scythe
AS 4026 Lion
- Cordless chainsaw
AKS 4035 Lion
- Cordless leaf blower
ALS 4025 Lion
- Cordless lawnmower
ARM 4046 A-Lion Set
- Cordless lawnmower
ARM 4051 A Lion-Set
- Battery scarifier
ARV 4038 Lion-Set
Insert/remove battery
Switch off the device, pull the con
-
tact chip (
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
A
B
C
D
E
F
G
H
I
J
17) and wait for the
blades to come to a stop. There is
a risk of personal injury.
1. To insert the battery (7) into the
device, push the battery along
the guide rail into the device. It
locks into place audibly.
2. To remove the battery (7) from
the device, press the release
button ( 7b) on the battery
and pull the battery out.
Working with the Lawnmower
Regular mowing encourages increased
foliation of the grass and kills off weeds at
the same time. Therefore, not only does
each mowing increase the density of the
lawn, it also produces an evenly resilient
lawn.
The first cut is to be made in around April,
at a growth height of 70 – 80 mm. In the
main vegetation period, the lawn is to be
mowed at least once a week.
• Run the equipment at a walking pace,
in tracks that are as even as possible.
For gap-free mowing, the tracks should
always overlap by a few centimetres.
• Adjust the cut height so the equipment
is not overloaded. Otherwise, the mo-
tor may be damaged.
Summary of Contents for 28528416
Page 3: ...3 6 7 18 8 20 21 17 19 17 17 ...
Page 162: ...162 B 46649 20201113 rev02_ms ...
Page 164: ......
