4
USE
Device overview
1 - Function key (ON/OFF)
2 - USB C Input/Output
3 - LCD Display
4 - USB A Output 1
5 - USB A Output 2
Operation
1. Function key (ON/OFF)
If the charging process does not start automatically, you can start
it manually by briefly pressing the function key. You can stop the
charging process and deactivate the Powerbank by briefly pressing
the key twice. If no device is connected to the Powerbank, the
Powerbank changes automatically into standby mode after a time
interval of approx. 30 seconds.
2. LCD Display
The current charging status is displayed numerically on the LCD
display during charging, resp. discharging the Powerbank as well as
through brief pressing of the function key.
3. Commissioning / Charging the Powerbank / Charging connected
devices
a) Charging the Powerbank
Connect the supplied USB C cable with the USB C port (USB C input)
of the Powerbank and connect the other end of the USB cable with a
standard USB port of a computer or USB power supply. The charging
process and the current charge status is signalled via the LCD display.
When the Powerbank is fully charged, the LCD display will show 100%.
The required charging time of the Powerbank is dependent on the
selected charging source and its output (max. 5V / 3A).
Fast charging:
To charge the Powerbank with maximum power (18 Watt), please use
a power supply and cable combination, which supports the Power
Delivery Standard (PD) or the Fast Charge Technology.
Fast charging is shown on the display by a green sign above the
percent sign. If this sign does not show up, your power supply or the
cable used is not compatible with the standards and the Powerbank is
charged normally.
1
2
5
4
3
