- 4.
a) Strobo/Dimmer/ Black-out (GR0635): it can acquire values from 0 to
255: black-out is performed with 0 value and with values between 1 and
250 the dimmer and the strobo effect speed can be adjusted.
- 5.
a) Focus: it can acquire values from 0 to 255: it adjusts the objective
position; with position 255 the objective is completely advanced.
- 6.
Empty Channel
- 7.
Pause time: it adjusts the duration of a scene; through the UP and
DOWN keys select the pre-set pause times (6, 12, 18, 24, 35, 50 seconds; 1,
2, 4, 6, 10, 15, 20, 30 and 40 minutes); push ENTER key to confirm. The
value of this range is not to be considered when the unit operates with the scroller accessory set to
"All with Pause" mode.
Repeat the previous passages for all the scenes that you intend to include in the program.
Push the MENU/ESC key to exit the programming. When the program is operating, all the scenes,
from scene number 1 to the scene in which the ESC key was pushed, are played.
After programming all the desidered scenes of a program, push the ESC key (twice) and select
EXECUTION to execute the program.
- EXECUTION: push the ENTER key: the projector starts to execute the selected program. The
display, besides indicating the program number and the scene being execu-
ted, indicates a value that represents, in percentage, the time elapsed from
the beginning of the scene. When it is switched on, the projector starts to
execute the program that was operating when the unit was switched off.
4- Options:
Two options are available; the first one is relevant to the images, the second one to the
colors.
SET-UP:
1) Push the MENU key and go through the menu using the UP and DOWN keys until the writing
"-4 Options" appears on display; push the ENTER key to access the menu;
2) Through the UP and DOWN keys, select the option (1 or 2) to be set up; push ENTER to con-
firm;
If the function 1 is set to ON, each time that an image change is performed,
during the change from an image to the next one, the black-out effect
appears.
If the function 2 is set to ON, each time that a color change is performed,
during the change from a color to the next one, the black-out effect appears.
19
Program 1
Play
Prog 1 Scene1
Esc P 36%
Main menu
4 Option
4.
B
B-o
ou
utt C
Co
ollo
orrC
Ch
ha
an
ng
ge
e
1. On
4.
B
B-o
ou
utt G
Go
ob
bo
occh
ha
an
ng
ge
e..
1. On
4.Dimmer shutter
001
5. Focus
001
6. Empty
001
7. Pause
12 sec.
