8.3 Fixed colour mode monochrome
8.4 SLAVE configuration RGBW
To set up the unit as SLAVE set the 5 channels DMX mode with address 001.
8.5 SLAVE configuration Dynamic white
To set up the unit as SLAVE set the 3 channels DMX mode with address 001.
8.6 SLAVE configuration monochromatic
To set up the unit as SLAVE set the unit with dmx address 001.
When operating in DMX mode, the projector can accept the following RDM commands:
• discovery
Upon request of the RDM controller, the projector adverts its own presence (the RDM controller will display the
projector between a list).
• DMX address reading and setting.
• Channels number reading and setting.
• On / Off identification
This command is used to identify the projector you want to get access to (the identification happens by swit-
ching on at full intensity all the LEDs).
• Manufacturer
The name of the manufacturer (Griven) is displayed.
• Model description
The projector model is displayed.
• Software version description
The version of the firmware in use on the projector is displayed.
• Temperature
The LEDs operating temperature value is displayed.
An internal temperature sensor prevents the unit from overheating. The temperature sensor will limit the current
to leds, protecting their integrity, if the ambient temperature exceeds the one allowed.
All components of the unit are available as spare parts at
Griven
dealers.
Exploded views, wiring diagrams, electronic layouts and advertising brochures are available on request.
To make the job of assistance centres easier, specify serial number and model of the unit which spare parts are
requested for.
9.0 RDM functions
10.0 Thermal protection
11.0 Spare parts
Function
Keys
Description
Fixed
colours
mode input
The preset colours mode is activated or deactivated by the (TV) key.
Colour
intensity
+
-
The intensity of the white colour is adjusted by the VOL+ and VOL- keys by
256 steps.
English
25
