In this chapter brief essential instructions for an immediate use of the unit are listed. These instructions are neces-
sary to connect and power up the unit, but they will not describe in complete details the functions of the unit it-
self. All other chapters in this manual are therefore supposed to be read, in order to learn all pieces of necessary
information relevant to the unit.
1.
Open the box and check the content.
2.
Install the unit.
3.
Remove the side panel “A” and the closing taps “B”.
4.
Connect the main calbe
“C”
.
It is suggested a cable type HQ7RN-F, suitable for outdoor ap-
plications, with minimum section 3x1.5 sq mm.
5.
Close the side panel “A” previously open.
Warning!
Make sure that the side panel gasket is properly positioned
and tighten the screws and the cable glands,
in order to avoid water infiltrations into the unit.
C
A
B
4.0 Quick turn on
14
English
