AL4484 nanoParade - Rev. 1.00
100-277 V
ac
100-277 V
ac
120 Ω Resistor
AL4487/ 3
LINE END CAP
DMX CONTROLLER
A
L 4487/ 2
- IP67 Power Supply 120W
nanoParade L=320 mm
ACTIVE
nanoParade L=320 mm Slave
PASSIVE
AL4487
Startline Cable
24 V
dc
24 V
dc
AL0512
DMX Cable or equivalent
AL0512
DMX Cable or equivalent
-
Use a DMX repeater on each 32nd
ACTIVE fixture of the daisy-chain or in case the total DMX cabl
e length exceeds 1000 ft ( 300 m.)
-
Install a 120 Ω resistor on the DMX OUT
cable of the last Startline Cable of the daisy-chain as descri
bed in the
AL4487 Startline Cable manual.
-
For further details on fixture connection and installation, ple
ase refer to the relevant instruction manual.
-
This is only an example of a possible configuration scheme. Oth
er configurations can be tailores to the client’
s needs.
AL4487/ 3
LINE END CAP
nanoParade L=320 mm Slave
PASSIVE
nanoParade L=320 mm Slave
PASSIVE
Maximum length of the chain: 5 m
( 16X nanoParade 320 or 8X nanoParade 620 or 4X nanoPara
de 1220 )
It’
s possible to install fixtures of dif
ferent lengths.
An
ACTIVE fixture is always required at the beginnig of the dai
sy-chain.
