4.2 Fitting the framework
1.
Untighten the screws
"A"
and remove the flange
"B"
.
2.
Open the unit by untightening the screws
"C"
and
remove the flange
"D"
and the glass
"E"
.
3.
Fit the unit to the framework by using the two auto-threading screws
"F"
which you will find
attached to this manual. The screws must be inserted into the two holes
"G"
.
4.
Close the unit by paying attention to the fact that the symbol
"H"
must match the very same
symbol to the flange
"D"
previously removed.
F
G
G
H
C
D
E
A
B
English
15
