AL4700 Graph-i-Dot - Rev. 1.00
page 9 of 12
551073
Addressing the Graph-I-Dot chain.
In order to address each Dot of the chain with its DMX address it is required the Control set addressing item AL4707
MODE
+
-
MODE
MODE
+
MODE
MODE
MODE
+
MODE
-
+
MODE
manually lights up pixels one by one
automatically lights up pixels one by one
+ &- vary the scrolling’s speed.
MODE
MODE
+
saves settings.
If the test confirmed the correct operation,
in order to close the procedure press
ON
It sets the max number of channels
it sets the number of channels of
each Dot.
eg: RGB=3 channels
GND A B
W
GND
A
B
N.C.
Connect the beginning of the chain to the Control set
addressing AL4707as shown in the picture aside.
