16
English
The
Graph-i-Core
unit has been designed for use “plug and play”.
After being connected to power supplies and DMX signal, in fact, the unit is ready to be used and no sort of in-
tervention is necessary.
Each RGB unit uses
3
DMX channels, each Monochromatic unit uses
1
DMX Channel. The units are fitted with a
self-addressing system.
By this system, connecting the
Graph-i-Core
units in series, each unit automatically sets its own initial DMX address,
starting from the channel following the one of the previous unit.
The following picture shows a connection example.
The following picture shows an example of installation with different types of projectors.
5.0 Use of the unit
Warning!
The Graph-i-Core output DMX signal cannot be used to control different models of projectors!!
If different projectors are in the same DMX universe, they must be put in the output DMX line of the controller
and set by considering the channels used by the Graph-i-Core units.