3.5-leaf barndoor set up
3.6 Electrical connection
1.
Cable the provided mains plug with a supply cable 3x2.5 mm
2
minimum;
2.
Connect the lantern to a mains supply of 230V - 50/60Hz.
Ensure that the mains cable is connected to earth; the safety thermoswitch must
have the following characteristics:
- rated for (In) 16A - sensitivity (Id) 0,03 A.
KOLORSTREAM® MK2
is provided with power factor correction system.
4.0 DISPLAY AND CONTROL PANEL USE
The led colour indicates the projector mode.
The green led indicates the operating mode.
The red light indicates the setting or the zapping mode.
When the projector is in the operating mode the display indicates the projector
DMX addressing number, which is 001 when the unit leaves the factory. In order to
change the DMX addressing number push (SELECT) then (-) or (+). When you find
the desired number push (ENTER).
Push (SELECT) when you want to view or zap an option. To memorise it push (ENTER).
If options are not entered within 15 seconds the projector returns to the operating
mode.
GREEN LED
RED LED
Flashing green led
NO DMX SIGNAL
Green led
DMX SIGNAL
Flashing red led
DMX SETTING
Red led
OPTIONS SETTING
-
Select
+
Enter
Ruotare nella direzione della
freccia per stringere il fascio
Ruotare nella direzione della
freccia per allargare il fascio
13
