1.0 PACKING
Check carefully the content of the box and in case of damage contact your for-
warder immediately.
The following items are included in the box:
n° 1 instructions leaflet
n° 1
KOLORSTREAM® MK2
n° 2 XLR 3 poles plugs (1 male + 1 female)
n° 1 mains plug
2.0 SAFETY
Even if this lantern is fitted with a safety micro-switch which automatically discon-
nects power as soon as the lamp cover is opened, disconnect the lantern from
mains supply before replacing the lamp.
• This projector has been designed for outdoor and indoor use. For safety operation,
maximum ambient temperature must not exceed 40°C.
• Caution: the temperature of the glass surface of the projector can reach 150°C.
• Caution: hot lamp; ensure that the lamp is cold before attempting to remove it
(wait for about 20 minutes).
• Caution: it is strongly recommended that a safety-chain or wire is attached to this
projector and secured to the main mounting framework to arrest the fall of the unit.
3.0 INSTALLATION
3.1 Fitting the lamp
1.
Open the front glass panel unscrewing the 4 screws located on the front of the
lantern
2.
Clean the lamp with a cleaning towel and fit it carefully in the lamp holder.
- avoid touching the lamp with fingers or dirty towels; do not shake the lamp;
- position the lamp towards the lamp cover to obtain the maximum light output
3.
Fix the lamp to the lamp holder.
4.
Put the front glass panel back and fix it in its original position.
11
